Rib Lath

Rib Lath (Template Network), Rib Lath (3/8″ High Rib) etc, galvanized rib lath is widely used as a background for plaster, render, stucco application in construction of suspended ceilings partition. Please contact with me if you interested in our rib lath products.

Shortening the Time (of construction)

• Easy to handle due to the light-weighted subsidiary materials (i.e. 1/10 weight of plywood)
• Improve the work efficiency
• Easy to dismantle
• Quick refilling-up

Cost Efficiency

• No skillful hand needed
• Cost savings of handling the form dismantling, disused materials and storage management
• Easy to work with
• Easy to bend into round form or right-angled side
• Curved surface

Minimizing the Space to install

• 1/20 of plywood in size
• Minimizing the storage space of material at the site
• Minimizing the cost of material handling

Excellence of Finished-work (plastering and tiling)

• Strengthening the level of adhesion through wire-net of skeleton surface
• Preventing the crack of plastering surface
• No prime plastering required

Quality Improvement of Concrete

• Easy to inspect the layout of reinforcing steel and easy to clean
• Ensuring homogeneous concrete strength(upper and lower parts)
• Restraining the surface crack
• Easy to strengthen the connection parts
• Improved earthquake-proof performance

Reduction of Wasted materials

• Nearly none of wastes after construction
• Easy clear and clean the site

Compatible with existing forms

• Plywood cast
• Euro-Form

Prevention of unreliable work

• Visibility of installation
• Preventing the quality deterioration by eliminating the surplus water

Improving the site safety

• Easy of handling with safety through the light-weight
• Excellent work results on the limited work space

Rib Lath Product parameters

1. SW×LW=Size of opening R.H=Rib Height R.D=Rib Distance  M.T= Material Weight
SW×LW/mm	M.T/mm	R.H.mm	R.D./mm	Wt kg/m2	Sheet size
4.5×15	0.3	4	75	1.26	610/750×2440
4.5×15	0.35	4	75	1.47	610/750×2440
4.5×15	0.4	4	75	1.68	610/750×2440
4.5×15	0.45	4	75	1.89	610/750×2440
4.5×15	0.5	4	75	2.10	610/750×2440

2. SW×LW=Size of opening R.H=Rib Height R.D=Rib Distance M.T= Material Weight
SW×LW/mm	M.T/mm	R.H.mm	R.D./mm	Wt  kg/m2	Sheet size
4.5×15	0.3	8	150	1.25	610×2440
4.5×15	0.35	8	150	1.46	610×2440
4.5×15	0.4	8	150	1.67	610×2440
4.5×15	0.45	8	150	1.88	610×2440
4.5×15	0.5	8	150	2.09	610×2440

3. SW×LW=Size of opening R.H=Rib Height R.D=Rib Distance M.T= Material Weight
SW×LW/mm	M.T/mm	R.H.mm	R.D./mm	Wt  kg/m2	Sheet size
10×17	0.3	8	75	1.06	610×2440
10×17	0.35	8	75	1.23	610×2440
10×17	0.4	8	75	1.41	610×2440
10×17	0.45	8	75	1.59	610×2440
10×17	0.5	8	75	1.76	610×2440