Products
Home > Products > Wire Mesh Series > Rib Lath

Rib Lath

Rib Lath (Template Network), Rib Lath (3/8" High Rib) etc, galvanized rib lath is widely used as a background for plaster, render, stucco application in construction of suspended ceilings partition. Please contact with me if you interested in our rib lath products.

Shortening the Time (of construction)

  • Easy to handle due to the light-weighted subsidiary materials (i.e. 1/10 weight of plywood)
  • Improve the work efficiency
  • Easy to dismantle
  • Quick refilling-up

Cost Efficiency

  • No skillful hand needed
  • Cost savings of handling the form dismantling, disused materials and storage management
  • Easy to work with
  • Easy to bend into round form or right-angled side
  • Curved surface

Minimizing the Space to install

  • 1/20 of plywood in size
  • Minimizing the storage space of material at the site
  • Minimizing the cost of material handling

Excellence of Finished-work (plastering and tiling)

  • Strengthening the level of adhesion through wire-net of skeleton surface
  • Preventing the crack of plastering surface
  • No prime plastering required

Quality Improvement of Concrete

  • Easy to inspect the layout of reinforcing steel and easy to clean
  • Ensuring homogeneous concrete strength(upper and lower parts)
  • Restraining the surface crack
  • Easy to strengthen the connection parts
  • Improved earthquake-proof performance

Reduction of Wasted materials

  • Nearly none of wastes after construction
  • Easy clear and clean the site

Compatible with existing forms

  • Plywood cast
  • Euro-Form

Prevention of unreliable work

  • Visibility of installation
  • Preventing the quality deterioration by eliminating the surplus water

Improving the site safety

  • Easy of handling with safety through the light-weight
  • Excellent work results on the limited work space

Rib Lath Product parameters

1. SW×LW=Size of opening R.H=Rib Height R.D=Rib Distance  M.T= Material Weight
SW×LW/mm M.T/mm R.H.mm R.D./mm Wt kg/m2 Sheet size
4.5×15 0.3 4 75 1.26 610/750×2440
4.5×15 0.35 4 75 1.47 610/750×2440
4.5×15 0.4 4 75 1.68 610/750×2440
4.5×15 0.45 4 75 1.89 610/750×2440
4.5×15 0.5 4 75 2.10 610/750×2440
2. SW×LW=Size of opening R.H=Rib Height R.D=Rib Distance M.T= Material Weight
SW×LW/mm M.T/mm R.H.mm R.D./mm Wt  kg/m2 Sheet size
4.5×15 0.3 8 150 1.25 610×2440
4.5×15 0.35 8 150 1.46 610×2440
4.5×15 0.4 8 150 1.67 610×2440
4.5×15 0.45 8 150 1.88 610×2440
4.5×15 0.5 8 150 2.09 610×2440
3. SW×LW=Size of opening R.H=Rib Height R.D=Rib Distance M.T= Material Weight
SW×LW/mm M.T/mm R.H.mm R.D./mm Wt  kg/m2 Sheet size
10×17 0.3 8 75 1.06 610×2440
10×17 0.35 8 75 1.23 610×2440
10×17 0.4 8 75 1.41 610×2440
10×17 0.45 8 75 1.59 610×2440
10×17 0.5 8 75 1.76 610×2440